410 Stainless Steel

410 SS Data Sheet

410 Stainless Steel

Products Offered:

We also provide safety grating, hex metal, FRP grating, and custom fabrication of all of our products.

Principal Design Features: 410 is the basic martensitic stainless which will attain high mechanical properties after heat treatment. It has good impact strength, corrosion, and scaling resistance up to 1200 F (649 C).

Applications: Cutlery, steam and gas turbine blades and buckets, bushings, valve components, fasteners, screens, and kitchen utensils.

Machinability: Tough, draggy chips with heavy build-up. While this alloy can be machined in the annealed condition, it tends to perform better in the cold drawn or heat-treated condition.

Welding: Most common methods of welding can be successfully employed with this alloy. To reduce the chance of cracking, it is advisable to preheat the workpiece to 350-400 F (177-204 C). Post-weld annealing is recommended to reattain maximum ductility. Filler metal, when required, should be AWS E/ER410.

410 Chemistry Data

Carbon0.15 max
Manganese1 max
Phosphorus0.04 max
Silicon1 max
Sulphur0.03 max

410 Physical Data

Density (lb / cu. in.)0.28
Specific Gravity7.7
Specific Heat (Btu/lb/Deg F - [32-212 Deg F])0.11
Electrical Resistivity (microhm-cm (at 68 Deg F))342
Melting Point (Deg F)2790
Modulus of Elasticity Tension29


This information is provided “as is” and MSS makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. MSS specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.

In no event shall MSS be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.

This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.