Expanded Metal Accessories

Expanded Metal Accessories

Expanded Metal Accessories
Expanded Metal Accessories

Expanded Metal Accessories U-Edging is a u-shaped strip that easily attaches to expanded metal edges by welding or press-fitting making edges safer and more attractive by providing a finished look. U edging is sometimes used when creating infill panels which are fabricated to custom sizes. Marco Specialty Steel creates these custom expanded metal infill panels with precise dimensions using U-edging.

Stocked in 4 different openings in 18 ga. Carbon Steel – 12 lengths. Aluminum and stainless steel available by special order.

Expanded Metal U-Edging

Expanded_Metal_U-Edging

1” U-Edging – 18 ga. 5/16” opening (35 lbs per 100 ft)

  • Carbon: Standard fits all but 3/4” #9, 1-1/2” #9, 1-1/2” #6, 2” #10, 2” #9; Flattened fits all
  • Aluminum: Standard fits all; flattened fits all (available special order)
  • Stainless: Standard fits all; flattened fits all (available special order)

1” U-Edging – 18 ga. 1/4” opening (35 lbs per 100 ft)

  • Carbon: Standard fits all but 3/4” #10, 3/4” #9, 1-1/2” #9, 1-1/2” #6, 2” #10, 2” #9; flattened fits all
  • Aluminum: Standard fits all but 3/4” .081hvy, 3/4” .125, 1-1/2” .125; flattened fits all (available special order)
  • Stainless: Standard fits all but 3/4” #9, 1-1/2” #9; flattened fits all (available special order)

1” U-Edging – 18 ga. 1/8” opening (34 lbs per 100 ft)

  • Carbon: Standard fits ONLY 1/4” #20, 1/4” #18; flattened fits all
  • Aluminum: Standard fits NONE; flattened fits all (available special order)
  • Stainless: Standard fits NONE; flattened fits all (available special order)

1” U-Edging – 18 ga. 1/16” opening (34 lbs per 100 ft)

  • Carbon: Standard fits NONE; flattened fits all BUT 1/2” #13, 3/4” #14, 3/4” #13, 3/4” #9, 1-1/2” #14, 1-1/2” #13, 1-1/2” #9
  • Aluminum: Standard fits NONE; flattened fits ONLY 1/2” .051, 3/4” .051, 1-1/2” .081 (available special order)
  • Stainless: Standard fits NONE; flattened fits all BUT 3/4” #13, 3/4” #9, 1-1/2” #13, 1-1/2” #9 (available special order)

Expanded Metal Coils (Reverse Diamond)

Expanded Metal made continuous from coil in Reverse Diamond where the LWD is parallel to the width of the material and the SWD is parallel to the length. Reverse Diamond can be run in any width up to 60” wide. Many small diamond designs are only manufactured as Reverse Diamond styles. This is particularly suited for the manufacturing of filters, chimney caps, and gutter guards.

Contact Us for an Expanded Metal U Edging Quote Today

Contact Marco Specialty Steel to learn more about our U Edging for expanded metal products and to receive a no-obligation quote. Whenever you’re ready to order, feel free to utilize our expanded metal ordering guide.

Marco Specialty Steel: Quality. Speed. Reliability.