Monel 400 Products Offered
Principal Design Features: This alloy of nickel-copper is resistant to sea water corrosion as well as to a variety of acids and other corrosive media.
Applications: Marine fixtures, pumps, valves and piping systems for sea water application. Because of its good corrosion resistance, it is also used in chemical plant equipment.
Monel Alloy 400 Chemistry
| Carbon | 0.3 max |
| Copper | 28 - 34 |
| Iron | 2.5 max |
| Manganese | 2 max |
| Nickel | Balance |
| Silicon | 0.5 max |
| Sulphur | 0.024 max |
Monel Alloy 400 Physical Data
| Density (lb / cu. in.) | 0.318 |
| Specific Gravity | 8.8 |
| Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) | 0.105 |
| Electrical Resistivity (microhm-cm (at 68 Deg F)) | 307 |
| Melting Point (Deg F) | 2425 |
| Poissons Ratio | 0.32 |
| Thermal Conductivity | 167 |
| Mean Coeff Thermal Expansion | 7.7 |
| Modulus of Elasticity Tension | 26 |
Disclaimer
This information is provided “as is” and MSS makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. MSS specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall MSS be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.