Incoloy 800

Incoloy Alloy 800

Products Offered

  • Wire Cloth
  • Perforated Metal
  • Expanded Metal
  • Bar Grating
  • Grip-Trac
  • Perf-O Grip®
  • Hex Metal

Principal Design Features: A Ni-Cr-Fe alloy that resists high temperature oxidation. This alloy is a first choice for an upgrade from the 300 series stainless steels when improved performance or strength at temperature is required. For higher ASME Boiler and Pressure Code design values, consider Alloy 800HT.

Partial List of Applications: Heat treating equipment and fixtures. Sheathing for electric resistance alloy tubular heating elements. Heat exchangers.

Incoloy Alloy 800 Chemistry

Aluminum0.15 - 0.6
Carbon0.1 max
Chromium19 - 23
Copper0.75 max
IronBalance
Manganese1.5 max
Nickel30 - 35
Silicon1 max
Sulphur0.015 max
Titanium0.15 - 0.6

Incoloy Alloy 800 Physical Data

Density (lb / cu. in.)0.287
Specific Gravity7.98
Specific Heat (Btu/lb/Deg F - [32-212 Deg F])0.11
Electrical Resistivity (microhm-cm (at 68 Deg F))595
Melting Point (Deg F)2500
Poissons Ratio0.339
Thermal Conductivity80
Mean Coeff Thermal Expansion7.9
Magnetic Permeability1.01
Modulus of Elasticity Tension28.5
Reduction of Area50

Disclaimer

This information is provided “as is” and MSS makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. MSS specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.

In no event shall MSS be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.

This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.

Quick Contact