Inconel 600/625 Alloy Grating & Wire Cloth
Perforated & Expanded Inconel 600/625
Marco carries inconel 600/625 alloy grating and wire cloth, as well as perforated and expanded inconel 600/625. Although very similar inconel 600 and inconel 625 have small differences that differentiate them for various applications and products. Please review the details of each below to determine which material best suits your needs.
Inconel 600
A general purpose structural engineering material for use at high temperatures where strength, stability, and durability are important. The alloy also has very good corrosion resistance. When considering this alloy, also investigate Alloy 690, which doubles the chromium content, to improve stress corrosion cracking capabilities.
Inconel 600 Products Offered
- Wire Cloth
- Perforated Metal
- Expanded Metal
- Bar Grating
Principal Design Features
| Carbon | 0.15 max |
| Chromium | 14 - 17 |
| Copper | 0.5 max |
| Iron | 6 - 10 |
| Manganese | 1 max |
| Nickel | Balance |
| Silicon | 0.5 max |
| Sulphur | 0.015 max |
| Density (lb / cu. in.) | 0.306 |
| Specific Gravity | 8.47 |
| Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) | 0.106 |
| Electrical Resistivity (microhm-cm (at 68 Deg F)) | 620 |
| Melting Point (Deg F) | 2550 |
| Thermal Conductivity | 103 |
| Mean Coeff Thermal Expansion | 5.8 |
| Magnetic Permeability | 1.01 |
| Modulus of Elasticity Tension | 31.1 |
| Reduction of Area | 60 |
DisclaimerThis information is provided "as is" and MSS makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. MSS specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall MSS be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.
Inconel 625
This nickel-chromium-molybdenum wrought alloy is an excellent general purpose material for elevated temperature use in high strength, oxidation problem applications. It also has excellent corrosion resistance to many acids and resists intergranular attack and stress-corrosion cracking.
Inconel 625 Products Offered
- Wire Cloth
- Perforated Metal
- Expanded Metal
- Bar Grating
Principal Design Features
| Aluminum | 0.4 max |
| Carbon | 0.1 max |
| Chromium | 20 - 23 |
| Cobalt | 1 max |
| Iron | 5 max |
| Manganese | 0.5 max |
| Molybdenum | 8 - 10 |
| Nickel | Balance |
| Niobium | 3.15 - 4.15 |
| Phosphorus | 0.015 max |
| Silicon | 0.5 max |
| Sulphur | 0.015 max |
| Titanium | 0.4 max |
| Density (lb / cu. in.) | 0.305 |
| Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) | 0.107 |
| Melting Point (Deg F) | 2425 |
| Poissons Ratio | 0.312 |
| Thermal Conductivity | 74 |
| Mean Coeff Thermal Expansion | 7.3 |
| Modulus of Elasticity Tension | 29.2 |
| Reduction of Area | 70 |
DisclaimerThis information is provided "as is" and MSS makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. MSS specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall MSS be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.
