Incoloy 800/825
Inconel 800
Products Offered
- Wire Cloth
- Perforated Metal
- Expanded Metal
- Bar Grating
- Grip Strut
- Perfo Grip
- Hex Metal
Principal Design Features
A Ni-Cr-Fe alloy that resists high temperature oxidation. This alloy is a first choice for an upgrade from the 300 series stainless steels when improved performance or strength at temperature is required. For higher ASME Boiler and Pressure Code design values, consider Alloy 800HT.
| Aluminum | 0.15 - 0.6 |
| Carbon | 0.1 max |
| Chromium | 19 - 23 |
| Copper | 0.75 max |
| Iron | Balance |
| Manganese | 1.5 max |
| Nickel | 30 - 35 |
| Silicon | 1 max |
| Sulphur | 0.015 max |
| Titanium | 0.15 - 0.6 |
| Density (lb / cu. in.) | 0.287 |
| Specific Gravity | 7.98 |
| Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) | 0.11 |
| Electrical Resistivity (microhm-cm (at 68 Deg F)) | 595 |
| Melting Point (Deg F) | 2500 |
| Poissons Ratio | 0.339 |
| Thermal Conductivity | 80 |
| Mean Coeff Thermal Expansion | 7.9 |
| Magnetic Permeability | 1.01 |
| Modulus of Elasticity Tension | 28.5 |
| Reduction of Area | 50 |
DisclaimerThis information is provided "as is" and MSS makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. MSS specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall MSS be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.
Inconel 825
Products Offered
- Wire Cloth
- Perforated Metal
- Expanded Metal
- Bar Grating
- Grip Strut
- Perfo Grip
- Hex Metal
Principal Design Features
An austenitic nickel-iron-chromium alloy with additions of other alloying elements to enhance resistance to chemical corrosion.
| Aluminum | 0.2 max |
| Carbon | 0.05 max |
| Chromium | 19.5 - 23.5 |
| Copper | 1.5 - 3 |
| Iron | Balance |
| Manganese | 1 max |
| Molybdenum | 2.5 - 3.5 |
| Nickel | 38-46 |
| Phosphorus | 0.03 max |
| Silicon | 0.5 max |
| Sulphur | 0.03 max |
| Titanium | 0.6 - 1.2 |
| Density (lb / cu. in.) | 0.294 |
| Specific Gravity | 8.14 |
| Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) | 0.105 |
| Electrical Resistivity (microhm-cm (at 68 Deg F)) | 678 |
| Melting Point (Deg F) | 2525 |
| Poissons Ratio | 0.42 |
| Thermal Conductivity | 78.5 |
| Mean Coeff Thermal Expansion | 7.8 |
| Magnetic Permeability | 1.005 |
| Modulus of Elasticity Tension | 29.8 |
DisclaimerThis information is provided "as is" and MSS makes no warranty of any kind with respect to the subject matter or accuracy of the information contained herein. MSS specifically disclaims all warranties, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall MSS be liable for any special, incidental, indirect or consequential damages of any kind or any damages whatsoever resulting from loss of use, data, profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be periodically made to the information herein.
